Parking space protector/lock

Remote control(30-80m) car parking space protector low voltage alarm simple installation Anti-thief, waterproof, rustproof

Specification:

I. Type X remote parking lock parameters:

Gauge lattice: 640 * 160 * 90 = 6 seconds on opening time: height: 310mm remote distance: < 30m: DC12v storage pool electricity pressure electric: 12V 7AH

Power supply: battery power supply, 220V power supply, safe and reliable. The standby current: < 2.2MA

A charging time: less than 90 days

This product is a full set of standard configuration: host a, two remote controls, smart charger, battery a, a product description, a mounting screw four, a manual handle, lock two keys.

Model: BX-1

Product characteristic: BX-1 cover plate can be folded upward to repair, and to take the battery more convenient, down to the lowest, resistance is stronger.

II. product features

1, function:

X type remote control type special parking lock can effectively prevent and politely dedicated parking spaces occupied by other vehicles, and may play a certain vehicle anti-theft function. When the vehicle arrives at the parking lot near the remote control is pressed down, keys, controller decline, cars can be parked in the parking position; when the car left, press the remote controller to rise, rising key, to prevent the parking spaces occupied by other vehicles, if the car park to the parking, the controller increases, at the same time can play vehicle anti-theft function.

2, features:

Type X remote parking lock, is convenient to use; rise blocked down automatically,

Low pressure alarm, overcurrent alarm function; and general waterproof function, simple installation, low failure rate

X type power 12V8AH maintenance-free batteries, suitable for convenient external power supply for parking area;

3, product main parameters

Work environment - 35 degrees - 60 degrees C an electric charge to use the time of four - six months

Working power supply DC12V8AH decreased after 90mm height

Remote control distance 20m rise height 310mm

On the rise, decline in time for 6 second dimension 640 * 160 * 90

4, installation instructions

In 1, no parking lock installation in hollows or water for a long time;

In 2, according to the specific situation of parking spaces ( depending on size, with parking spaces ) after installation does not interfere with other vehicle backing is appropriate, choose the installation location, the controller base corresponding hole in the floor drilling the hole of diameter 10mm;

In 3, floor holes into the M8mm expansion screws, onto the parking lock, and then tighten the nut, installed, will be around health clean;

In 4, press the keys of the remote controller, the controller corresponding movement (Experiment 2 - 3 times );

5, the use of information

In 1, after installation, you can put into normal use;

In 2, when the parking car free, controller should be at the highest position;

In 3, when the car came back, in the car to reach the parking nearby, press the remote drop key, so that the controller down, when reduced to the low, square can be pulled into the parking lot;

In 4, the car left, press the remote controller to rise, rising key, to prevent the parking spaces occupied by other vehicles.

Parking space protector/lock